A study on aramid nano-aerogel fiber and its fabric thermal conductivity
Abstract:
Aramid nano-aerogel represents an ideal structure for the fabrication of next-generation high-performance thermal insulation fibers and textiles. Single aramid nano-aerogel fiber can be achieved via wet spinning. The thermal conductivity of these fibers, a crucial determinant of textile insulation performance, remains under-explored in terms of numerical modeling. This research aims to establish a numerical inversion model to determine the thermal conductivity of single aramid nano-aerogel fiber. By simulating the three-dimensional geometry of plain fabric, the volume fraction of gas and solid within the fabrics are computed. Drawing from the law of energy conservation and Fourier's law of heat conduction, a relationship model is proposed between the thermal conductivity of single aramid nano-aerogel fiber and the overall thermal conductivity of the fabric. The finite difference method is employed to ascertain the thermal conductivity of single aramid nano-aerogel fiber. Furthermore, the influence of the geometric structure and the fiber diameter on the thermal insulation performance of the single-layer fabric is analyzed, which provides a feasible approach for the subsequent design of fabric structures with excellent thermal insulation properties.
Keywords:
Aramid nano-aerogel fiber, Fabric thermal conductivity, Structural model
APA Citation:
Rui Fang, Yue Xie, Bo Zhang, Hao Wang, Min Zhang (2024). A study on aramid nano-aerogel fiber and its fabric thermal conductivity. International Journal of Materials Science and Technology Studies, 1(1), 38-51. https://doi.org/10.62051//ijmsts.v1n1.04
References
- S. Schiavoni, F. D. Alessandro, F. Bianchi, and F. Asdrubali, "Insulation materials for the building sector: A review and comparative analysis" Renew Sust Energ Rev. 5(45), 988-1011 (2016).
- F. Zhu, and Y. Li, "Theoretical prediction and experimental characterization of radiative properties and thermal conductivities of fibrous aramid fabrics" J Ind Text. 51(5), 8826-8844 (2022).
- T. Xie, Y. L. He, M. Wu, and C. He, "A review of heat transfer models of nanoporous silica aerogel insulation material" J Eng Thermophys-rus. 35(2), 299-304 (2014).
- W. J. Li, H. R. Liang, Z. W. Zhang, J. Huang, H. M. Huang and J. Liang, "Analysis of influence of fabric architecture and radiation characteristics on effective thermal conductivity of carbonized woven thermal protection composites", Acta Astronautica. 188(3), 387-399(2021).
- L. Lu, W. Yi, and D. L. Zhang, "3ω method for specific heat and thermal conductivity measurements" Rev Sci Instrum. 72(7), 2996–3003 (2002).
- J. L. Wang, M. Gu, W.G. Ma, X. Zhang, and Y. Song, "Measurement of thermal conductivity of an individual fiber using changing length t-type method" J Eng Thermophys-rus. 12(26), 90-92 (2009).
- Y. D. Hu, J. H. Liu, H. D. Wang, and X. Zhang, "Simultaneous measurement of thermal properties and convective heat transfer coefficient of individual carbon fiber using Raman spectroscopy" CIESC Journal. 65(S1), 251-257 (2013).
- L. Li, H. Xiao, B. W. Cheng, and X. B. Kui, "Review of thermal conductivity of single fibers and their aggregates" J Silk. 53(08), 20-25 (2016).
- Z. L. Wang, D. W. Tang, X. H. Zheng, W. F. Bu, and W. G. Zhang, "Simultaneous measurements of thermal conductivity, thermal capacity of an individual carbon fiber" J Eng Thermophys-rus. 28(3), 490-492 (2007).
- Y. Cai, Y. C. Yang, and J. R. Qian, "Conductivity of Woven Fabrics Based on Structural Parameters" Adv Text Technol. 29(2), 43-49, (2021).
- D. Neda, P. Pedram, and T. Shahram, "Introducing a novel model for predicting effective thermal conductivity of spacer fabrics based on their structural parameters" J Therm Anal Calorim. 147(12), 6615-6629, (2022).
- P. Duda, "Heat Transfer Coefficient Distribution-A Review of Calculation Methods" Energies. 16(9), 1996-1073, (2023).
- H. D. Wang, B. Y. Cao, Z. Y. Guo, "Non-Fourier Heat Conduction in Carbon Nanotubes" J. Heat Transfer. 134(5), 0022-1481, (2012).
- S. Mazumder, "Comparative Assessment of the Finite Difference, Finite Element, and Finite Volume Methods for a Benchmark One-Dimensional Steady-State Heat Conduction Problem" J. Heat Transfer. 135(7), 0022-1481, (2017).
- S. Kazem, M. Dehghan, "Application of finite difference method of lines on the heat equation" Nemer Meth Part D E. 34(2), 0749-159X, (2018).
- L. Li, H. Xiao, B. W. Cheng, "Influence Factor and Study Status of Fabric Contact Warm-cool Feeling" Cotton Text Tech. 44(1), 80-84, (2016).