← Back to Volume 4, Issue 1

The Performance of Recycled Fine Aggregate Foamed Concrete Incorporating Ground Granulated Blast Furnace Slag-Steel Slag

Bo Zhang
Vol.4, No.1, pp.10-28, 2025 DOI: 10.62051/ijmsts.v4n1.02 August 6, 2025
Download PDF
Abstract: To address the low utilization rates of discarded concrete and industrial solid wastes, this study developed a novel foam concrete (FC) incorporating ground granulated blast furnace slag (GGBS), steel slag (SS), and cement as binders, with natural river sand blended with carbonized recycled fine aggregate (CRFA) as fine aggregates, and reinforced with modified basalt fiber (MBF). FC can be used to backfill voids in underground projects, which not only reduces the overall weight of the building, but also insulates and saves energy. Initially, a univariate experiment determined the optimal CRFA replacement rate and MBF content. Subsequently, the effects of GGBS and SS on the mechanical and physical properties of FC were investigated. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses revealed a synergistic hydration mechanism between GGBS and SS. The results showed that a 20% CRFA replacement and 4 kg·m-3 MBF produced maximum compressive and flexural strengths while reducing thermal conductivity. Additionally, the simultaneous addition of GGBS and SS decreased CH content and refined the pore structure, yielding a more uniform distribution with fewer connected pores. When both GGBS and SS were incorporated at a 20% replacement level, the 28-day compressive and flexural strengths peaked, and thermal conductivity decreased with increasing slag ratios. These findings confirm the synergistic hydration phenomenon of GGBS and SS and offer theoretical guidance for the engineering application of FC.
Keywords: Foam concrete, Steel slag, Blast furnace slag, Recycled aggregate, Basalt fiber
APA Citation: Bo Zhang (2025). The Performance of Recycled Fine Aggregate Foamed Concrete Incorporating Ground Granulated Blast Furnace Slag-Steel Slag. International Journal of Materials Science and Technology Studies, 4(1), 10-28. https://doi.org/10.62051/ijmsts.v4n1.02

References

  1. A. Raj, D. Sathyan, K.M. Mini, Physical and functional characteristics of foam concrete: A review, Constr. Build. Mater. 221 (2019) 787-799, https://doi.org/10.1016/j.conbuildmat.2019.06.052
  2. N. Narayanan, K. Ramamurthy, Structure and properties of aerated concrete: a review, Cem. Concr. Compos. 22 (2000) 321-329, https://doi.org/10.1016/S0958-9465(00)00016-0
  3. S. Feng, Y. Gao, H. Xiao, C. Xue, Influence of fibers and bubble structure on thermal conductivity and mechanical performances of foam concrete, Constr. Build. Mater. 445 (2024) 137956, https://doi.org/10.1016/j.conbuildmat.2024.137956
  4. M. Nedeljković, J. Visser, B. Šavija, S. Valcke, E. Schlangen, Use of fine recycled concrete aggregates in concrete: A critical review, J. Build. Eng. 38 (2021) 102196, https://doi.org/10.1016/j.jobe.2021.102196
  5. Z. Lu, Q. Tan, D. Wang, F. Zhang, J. Lin, Dynamic performance of components constructed from recycled concrete incorporating aggregates modified by accelerated carbonation, J. Build. Eng. 95 (2024) 110273, https://doi.org/10.1016/j.jobe.2024.110273
  6. W. Zuo, X. Zhao, J. Luo, Z. He, J. Zhao, Investigating the impact of carbonation curing concentrations on the mechanical properties and microstructure of recycled concrete, J. Build. Eng. 96 (2024) 110465, https://doi.org/10.1016/j.jobe.2024.110465
  7. B. Zhan, C.S. Poon, Q. Liu, S. Kou, C. Shi, Experimental study on CO2 curing for enhancement of recycled aggregate properties, Constr. Build. Mater. 67 (2014) 3-7, https://doi.org/10.1016/j.conbuildmat.2013.09.008
  8. Y. Li, T. Fu, R. Wang, Y. Li, An assessment of microcracks in the interfacial transition zone of recycled concrete aggregates cured by CO2, Constr. Build. Mater. 236 (2020) 117543, https://doi.org/10.1016/j.conbuildmat.2019.117543
  9. B. Lu, C. Shi, Z. Cao, M. Guo, J. Zheng, Effect of carbonated coarse recycled concrete aggregate on the properties and microstructure of recycled concrete, J. Cleaner Prod. 233 (2019) 421-428, https://doi.org/10.1016/j.jclepro.2019.05.350
  10. M. Iorio, M.L. Santarelli, G. González-Gaitano, J. González-Benito, Surface modification and characterization of basalt fibers as potential reinforcement of concretes, Appl. Surf. Sci. 427 (2018) 1248-1256, https://doi.org/10.1016/j.apsusc.2017.08.196
  11. O.Y. Bayraktar, G. Yarar, A. Benli, G. Kaplan, O. Gencel, M. Sutcu, M. Kozłowski, M. Kadela, Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement, Struct. Concr. 24 (2023) 1152-1178, https://doi.org/10.1002/suco.202200142
  12. T.M. Borhan, Properties of glass concrete reinforced with short basalt fibre, Mater. Des. 42 (2012) 265-271, https://doi.org/10.1016/j.matdes.2012.05.062
  13. O. Gencel, M. Nodehi, O. Yavuz Bayraktar, G. Kaplan, A. Benli, A. Gholampour, T. Ozbakkaloglu, Basalt fiber-reinforced foam concrete containing silica fume: An experimental study, Constr. Build. Mater. 326 (2022) 126861, https://doi.org/10.1016/j.conbuildmat.2022.126861
  14. Y.G. Deng, B.J. Zhao, T.T. Dai, G.Q. Li, Y. Li, Study on the dispersibility of modified basalt fiber and its influence on the mechanical properties of concrete, Constr. Build. Mater. 350 (2022) 128839, https://doi.org/10.1016/j.conbuildmat.2022.128839
  15. E. Özbay, M. Erdemir, H.İ. Durmuş, Utilization and efficiency of ground granulated blast furnace slag on concrete properties – A review, Constr. Build. Mater. 105 (2016) 423-434, https://doi.org/10.1016/j.conbuildmat.2015.12.153